page contents

Mini Protank - By CigVape

Mini Protank - By CigVape
Mini Protank - By CigVape Mini Protank - By CigVape Mini Protank - By CigVape
Brand: CigVape
Product Code: Mini Protank
Availability: In Stock
Price: £12.95 £9.95
Qty:     - OR -   Add to Wish List
Add to Compare

It’s so good… we are proud to put our name on it!

The CigVape Mini Protank offers the same great features and performance as other CigVape Clearomisers but with the introduction of a glass tank! The Protank is EGO threaded and will work on an EGO thread MOD just as well as a standard Evod or Ego type batteries without the need for an adapter.

Updated in CigVape Protank:

Stronger base
Pyrex tank is replaceable
Glue Free: All parts are replaceable
Can be fitted with 510 Drip tip

Features:
Replaceable Atomiser Head
Bottom Coil
Pyrex Glass Tank
1.5ml - 2.0ml capacity
Dimensions: 3"L x 9/16"D

Tips:
The metal tube in the centre of this Clearomiser leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomiser.
When unfastening the base (Atomiser head) to refill the Clearomiser, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the centre tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the Clearomiser.

Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the centre of the Clearomiser (Usually occurs after a refill). Ridding the centre tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomiser from the battery, wrap a cloth or tissue around the battery end of the Clearomiser and blow through the mouthpiece.

The atomiser head of the Protank can unfasten when unscrewing the tube or base. Always secure the atomiser head before reinstalling the base of the Protank.
It is normal to find a small amount of liquid in the battery contact area when removing the Clearomiser or any atomiser. We recommend cleaning the battery with paper towel before charging it.

When possible, keep the tank full and never below 1/4 full of E-Liquid ("topped off"). This helps maintain the "vacuum" in the tank and prevent leaks.

Atomiser heads have an average lifespan between 10 to 20 refills. When the atomiser head wears down the vapor produced will be less and it may begin to leak. It is now time to replace the atomiser head with a new one.

Package Contents:
1 x CigVape Protank II (Pyrex tank, top cap, bottom cap, screwed connecting tube and EGO base)
1 x 510 Drip tip
2 x Atomiser heads for CigVape Protank

 
Mini Protank

Topping up:

  1. To fill up your tank, simply unscrew the base unit and pour your chosen liquid to the sides of the silver centre hole.
  2. Make sure not to fill it too much, so that no liquid can go down the centre hole.
  3. Take your base unit, screw it back on and vape away!

Changing Coil:

  1. After 10-20 refills we suggest you change your coil for a fresh one.
  2. Simply unscrew your battery from your clearomiser.
  3. With your clearomisers mouthpiece facing down to the floor, unscrew the base.
  4. Once your base has been removed, you will see a silver pin coming out of it. This pin is your heating coil. Unscrew the coil and replace with a fresh one.
  5. Fill your tank with your chosen liquid and attach the base with heating coil.
  6. Roll the clearomiser around to let the e-liquid absorb for 10 mins; prior to puffing.

Important: To fully appreciate our E-Liquid taste we recommend that you change your clearomiser coil each time you intend using a new flavour E-Liquid as the taste can be impaired if you mix flavours using the same coil.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: