page contents

Evod-V Blister Kit - By CigVape

Evod-V Blister Kit - By CigVape
Evod-V Blister Kit - By CigVape Evod-V Blister Kit - By CigVape Evod-V Blister Kit - By CigVape
Brand: CigVape
Product Code: Evod-V
Availability: In Stock
Price: £15.95 £11.95

Available Options


* Colour:

Qty:     - OR -   Add to Wish List
Add to Compare

It’s so good… we are proud to put our name on it!

Brand new for 2014 The EVOD-V - Variable Voltage Blister Kit.

You can change the battery voltage from 3.5v to 4.1v to achieve your individual smoking preference.

Each kit includes:

  • 1 x Evod-V 650mah Variable Voltage battery
  • 1 x MT3 BCC Atomiser
  • 1 x USB charger

All of the above retail packaged with user instructions within a blister pack set.

1.5ml Capacity

Changeable Coil head

Easy to clean

Cheap to maintain (Purchase new atomiser coils when needed, the outer shell is very durable)

How to Use

To fill the Evod clearomiser unscrew the base unit. Hold the clearomiser upside down and fill with approximately 1.5ml of liquid (along the side of the unit, avoiding the air hole). While it is still upside down screw the coil base back onto the tank. The Evod clearomiser is now ready for use. Once the atomiser head on your Evod clearomiser is burnt out, replace with a new atomiser head. To do this, just unscrew the old atomiser from the Evod's base unit and change over.

Cleaning
Wash the unit with warm water and leave to dry before use.

Compatibility 
Can be used with any Ego or Evod style battery.

How to Refill your Evod:

  1. Unscrew your EVOD clearomiser from your battery.
  2. Making sure that your mouthpiece is facing the floor, unscrew the base (part that connects to the battery).
  3. With your chosen CigVape E-Liquid begin to squeeze the fluid down the side of the clearomiser making sure to avoid any e-liquid going down the silver centre pin. You will notice the e liquid beginning to fill the clearomiser cartridge. On the side of the clearomiser there is a viewing window, make sure not to fill above the centre pin.
  4. Once complete, take the base and screw it back on to the device.
  5. Roll the clearomiser around to let the e liquid absorb for 10 seconds, feel free to skip this step after the first refill.
  6. Your CigVape Cigarette is now ready to use. To activate the device please press the battery button 5 times to turn it on; an LED light will flash, and you are ready to go.
  7. To use, hold the battery button down when inhaling, making sure to let go after each drag.

How to change your coil:

  1. After 10-20 refills we suggest you change your coil for a fresh one.
  2. Simply unscrew your battery from your clearomiser.
  3. With your clearomiser mouthpiece facing down to the floor, unscrew the base.
  4. Once your base has been removed, you will see a silver pin coming out of it. This pin is your heating coil. Unscrew the coil and replace with a fresh one.
  5. Fill your Evod Clearomiser with your chosen liquid and attach the base and heating coil.
  6. Roll the clearomiser around to let the e liquid absorb for 10 seconds.

How to charge:

  1. When your battery light flashes and your device stops activating it is ready for charging.
  2. Unscrew your battery from your clearomiser.
  3. Take your charger and screw your battery on (please make sure to not attach too tightly)
  4. Plug your battery in using our approved USB wall charger only (See below). You will see a red light; once this goes solid green you are ready to re-use your battery.

Important: To fully appreciate our E-Liquid taste we recommend that you change your clearomiser coil each time you intend using a new flavour E-Liquid as the taste can be impaired if you mix flavours using the same coil.

WARNING:

Please only use suitable AC wall chargers which are made for charging our batteries. Max DC 500mA only. PLEASE DO NOT USE MOBILE PHONE CHARGERS, COMPUTER CHARGERS OR ANY OTHER TYPE OF USB DEVICE AS THESE ARE NOT SUITABLE AND MAY CAUSE DAMAGE, EXPLOSION AND/ OR FIRE.

If you are using any of our batteries, we strongly recommend that you use a LI-PO Safe Charging Bag every time you charge or need to store your battery. Using this bag will reduce any damage that might possibly occur should there be any problem during charging.

The charger lead and battery must be placed inside the bag and sealed using the Velcro fastener.

LI-PO Safe Charging Bags can be purchased by clicking HERE

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: